This section specifies the template SerialisedAsset.
The specification comprises a SysML Block that represents the template and an
associated Parametric Diagram that defines the templates and
PLCS PSMTemplate objects
instantiated by the SerialisedAsset template.
The specification comprises the following sections:
- Section Description provides a
description of the template;
- Section Template Block specifies the SysML
Block that represents the template;
- Section Template Properties specifies
the properties, i.e. the SysML Part, Reference and Value properties of the
templates SysML Block;
- Section Template Output Ports
specifies the SysML Output Ports of the templates SysML Block. These bind to the
templates and PLCS PSM objects
instantiated by the SerialisedAsset template as
described in section Template
Parametric Diagram;
- Section Template Constraints specifies
the constraints on PLCS PSMTemplate objects instantiated by the
SerialisedAsset template;
- Section Template Parametric
Diagram specifies the templates and PLCS PSMTemplate objects instantiated by the
SerialisedAsset template;
- Section Instantiated blocks specifies
the templates and PLCS PSMTemplate objects instantiated by the
SerialisedAsset template and bound to private
parts of the template;
- Section Default instances species the
instances that have been instantiated in the template. These are used to set
the default value of blocks.
- Section Constraint blocks identifies the
constraint blocks that have been specified in this template;
- Section Example data
provides example XML data sets that have been instantiated in accordance
with this template.
NOTE
An explanation of a template and its specification is provided in
the
Template
overviewThe SerialisedAsset template describes how to represent an individual of a design
that is uniquely identified
by a serial number. This is used to denote the asset upon which an activity has taken
place that results in
a change in the monitored properties of that asset, e.g. a consumption of life event
or a maintenance procedure.
No templates have been explicitly defined as being related to the SerialisedAsset template.
NOTE
The SerialisedAsset template may make reference
to other templates as part of the Parametric Diagram. These are not listed
here.
Figure 1 shows the SysML Block that represents the template. The Block is an abstraction
representing a pattern of templates and PLCS PSMTemplate objects.
The properties, i.e. the SysML Block Part, Reference and Value properties, of the
template's SysML Block are described in the Template
Properties section.
The output ports shown on the template's SysML Block are described in the template output ports section.
The SysML Parametric diagrams for the template Block are shown in template parametric diagram section.
Figure 1 - Template block definition diagram for SerialisedAsset
The following SysML Part, Reference, and Value properties are defined for this template:
References:
supplierCode [1] (Template: OASIS:
Organization)
The supplier or manufacturer code associated with the asset.
The reference data used in Template: OASIS:
Organization is restricted as follows:
RDL constraint 1:The supplier or Manufacturer Code must be an NCAGE Code.
The reference data for:
OASIS:Organization.class -> ExternalOwlClass.class
is restricted to the following class or a subclass:
Parts:
partNumber [1] (Template: OASIS:
Identification)
PartNumber of the asset. This is the designed part number, not the individual identifier
The reference data used in Template: OASIS:
Identification is restricted as follows:
RDL constraint 1:The part number must be classified to be a "Part_identification_code" or a sub-class
of "Part_identification_code".
The reference data for:
OASIS:Identification.class -> ExternalOwlClass.class
is restricted to the following class or a subclass:
serialNumber [1] (Template: OASIS:
Identification)
The Serial Number of the asset. This is the identifier of the individual asset.
The reference data used in Template: OASIS:
Identification is restricted as follows:
RDL constraint 1:The serial_number must be classified to be a "Serial_identification_code".
The reference data for:
OASIS:Identification.class -> ExternalOwlClass.class
is restricted to the following class or a subclass:
NSN [0..1] (Template: OASIS:
Identification)
Optional - National Stock Number associated with the Asset.
The reference data used in Template: OASIS:
Identification is restricted as follows:
RDL constraint 1:The NSN, when present, must be classified as an "NSN_code".
The reference data for:
OASIS:Identification.class -> ExternalOwlClass.class
is restricted to the following class or a subclass:
assetRole [0..1] (Template: OASIS:
Classifier)
Optional - A classification of the Asset to determine it's Role, e.g. LifedAsset
The reference data used in Template: OASIS:
Classifier is restricted as follows:
RDL constraint 1:The asset_role, when present, must be classified as a subclass of Serialised_asset
.
The reference data for:
ExternalOwlClass.class
is restricted to classes that are subclasses of the following class:
The following output ports are defined for this template:
stockItem (Block: Ap239Ap233Psm:
ResourceItem)
Enables the
Block: Ap239Ap233Psm:
ResourceItem instantiated by this template to be referenced
when the template is used.
part (Block: Ap239Ap233Psm:
Part)
Enables the
Block: Ap239Ap233Psm:
Part instantiated by this template to be referenced
when the template is used.
There are no constraints defined for this template.
This section describes the template's Parametric Diagram. The diagram details
the pattern of templates and PLCS PSMTemplate objects that are required to
represent the template SerialisedAsset.
The public properties, i.e. those visible in the template's SysML block (See Figure 1) are shown on the left of a
Parametric Diagram.
NOTE
Restrictions on the reference data to be set on the public properties is
defined in the
Template Properties section.
The output ports are shown on the right of a Parametric Diagram.
PLCS PSM
objects are shaded khaki and
Templates
are shaded light green in a Parametric Diagram.
Figure 2 - Parametric diagram for SerialisedAsset
The following blocks are instantiated by this template and bound to private parts
of the
template as shown in the Parametric Diagram
section:
Private Part Property:
realizedPart [1] (Template: OASIS:
RealizedPart)
Private Part Property:
stockItem [0..1] (Template: OASIS:
StockItem)
Private Part Property:
part [1] (Template: OASIS:
Part)
There are no instances that have been instantiated in this template.
There are no constraint blocks defined in this template.
The following section provides an example XML dataset that has been instantiated in
accordance with this template.
Data set: Exemplar:SerialisedAsset
This example shows the Exemplar SerialisedAsset Template instantiated in XML.
