This section specifies the template MessageItemDefinition.
The specification comprises a SysML Block that represents the template and an
associated Parametric Diagram that defines the templates and
PLCS PSMTemplate objects
instantiated by the MessageItemDefinition template.
The specification comprises the following sections:
- Section Description provides a
description of the template;
- Section Template Block specifies the SysML
Block that represents the template;
- Section Template Properties specifies
the properties, i.e. the SysML Part, Reference and Value properties of the
templates SysML Block;
- Section Template Output Ports
specifies the SysML Output Ports of the templates SysML Block. These bind to the
templates and PLCS PSM objects
instantiated by the MessageItemDefinition template as
described in section Template
Parametric Diagram;
- Section Template Constraints specifies
the constraints on PLCS PSMTemplate objects instantiated by the
MessageItemDefinition template;
- Section Template Parametric
Diagram specifies the templates and PLCS PSMTemplate objects instantiated by the
MessageItemDefinition template;
- Section Instantiated blocks specifies
the templates and PLCS PSMTemplate objects instantiated by the
MessageItemDefinition template and bound to private
parts of the template;
- Section Default instances species the
instances that have been instantiated in the template. These are used to set
the default value of blocks.
- Section Constraint blocks identifies the
constraint blocks that have been specified in this template;
- Section Example data
provides example XML data sets that have been instantiated in accordance
with this template.
NOTE
An explanation of a template and its specification is provided in
the
Template
overviewThe MessageItemDefinition template describes how to represent a message containing
at least one item of supply related to a supplier's part. The message is intended
to be sent from the Swedish Defence Materiel Administration (FMV) to the supplier
of the part, so that other deliveries from the supplier can refer to the correct item
of supply by using the proper identifier.
The following templates are related to the MessageItemDefinition template:
NOTE
The MessageItemDefinition template may make reference
to other templates as part of the Parametric Diagram. These are not listed
here.
Figure 1 shows the SysML Block that represents the template. The Block is an abstraction
representing a pattern of templates and PLCS PSMTemplate objects.
The properties, i.e. the SysML Block Part, Reference and Value properties, of the
template's SysML Block are described in the Template
Properties section.
The output ports shown on the template's SysML Block are described in the template output ports section.
The SysML Parametric diagrams for the template Block are shown in template parametric diagram section.
Figure 1 - Template block definition diagram for MessageItemDefinition
The following SysML Part, Reference, and Value properties are defined for this template:
References:
There are no output ports are defined for this template.
There are no constraints defined for this template.
This section describes the template's Parametric Diagram. The diagram details
the pattern of templates and PLCS PSMTemplate objects that are required to
represent the template MessageItemDefinition.
The public properties, i.e. those visible in the template's SysML block (See Figure 1) are shown on the left of a
Parametric Diagram.
NOTE
Restrictions on the reference data to be set on the public properties is
defined in the
Template Properties section.
The output ports are shown on the right of a Parametric Diagram.
PLCS PSM
objects are shaded khaki and
Templates
are shaded light green in a Parametric Diagram.
Figure 2 - MessageItemDefinition
The following blocks are instantiated by this template and bound to private parts
of the
template as shown in the Parametric Diagram
section:
Private Reference Property:
classDEXversion [1] (Block: Ap239Ap233Psm:
ExternalOwlClass)
The following constraint, normally a uniqueness constraint, is
applicable when instantiating the ExternalOwlClass:
rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:
combineClasses [1] (Constraint Block: SwedishDefence:MessageWrapper:
CombineOwlClasses)
Private Reference Property:
classMessage [1] (Block: Ap239Ap233Psm:
ExternalOwlClass)
The following constraint, normally a uniqueness constraint, is
applicable when instantiating the ExternalOwlClass:
rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:
partDefinitionORItemOfSupply [1] ( Constraint Block:
SwedishDefence:MessageItemDefinition:
PartDefinitionOrItemOfSupply)
There are no instances that have been instantiated in this template.
Figure 3 shows the constraint blocks that have been created in the template.
Constraint Blocks are typically used to combine blocks into a collection that
can then be bound to a property. For example, combining a set of identifications
that can then be bound to property of type Identification.
Figure 3 - Constraint block diagram for MessageItemDefinition
The following constraint blocks have been created:
Constraint: PartDefinitionOrItemOfSupplySpecification: (OCL2.0)
assigned = if not partDefinition.oclIsUndefined() then
partDefinition else itemOfSupply endif
The abstract ItemDefinition is either an ItemOfSupply or a PartDefinition.
No example data sets have been provided for this Template.
