Template: SwedishDefence:MessagePhysicalDesignStructure

This section specifies the template MessagePhysicalDesignStructure.

The specification comprises a SysML Block that represents the template and an associated Parametric Diagram that defines the templates and PLCS PSMTemplate objects instantiated by the MessagePhysicalDesignStructure template.

The specification comprises the following sections:

NOTE    An explanation of a template and its specification is provided in the Template overview
The MessagePhysicalDesignStructure template describes how to represent a message concerning the composition of physical design structures .

No templates have been explicitly defined as being related to the MessagePhysicalDesignStructure template.

NOTE    The MessagePhysicalDesignStructure template may make reference to other templates as part of the Parametric Diagram. These are not listed here.

Figure 1 shows the SysML Block that represents the template. The Block is an abstraction representing a pattern of templates and PLCS PSMTemplate objects.

The properties, i.e. the SysML Block Part, Reference and Value properties, of the template's SysML Block are described in the Template Properties section.

The output ports shown on the template's SysML Block are described in the template output ports section.

The SysML Parametric diagrams for the template Block are shown in template parametric diagram section.

Figure 1 -  Template block definition diagram for MessagePhysicalDesignStructure

The following SysML Part, Reference, and Value properties are defined for this template:

References:
contents [1..*] (Template: SwedishDefence:PhysicalBreakdown)
The designed physical structures contained within the message.

There are no output ports are defined for this template.

There are no constraints defined for this template.

This section describes the template's Parametric Diagram. The diagram details the pattern of templates and PLCS PSMTemplate objects that are required to represent the template MessagePhysicalDesignStructure.

The public properties, i.e. those visible in the template's SysML block (See Figure 1) are shown on the left of a Parametric Diagram.

NOTE    Restrictions on the reference data to be set on the public properties is defined in the Template Properties section.

The output ports are shown on the right of a Parametric Diagram.

PLCS PSM objects are shaded khaki and Templates are shaded light green in a Parametric Diagram.

Figure 2 -  MessagePhysicalDesignStructure

The following blocks are instantiated by this template and bound to private parts of the template as shown in the Parametric Diagram section:

Private Part Property:combineClasses [1] (Constraint Block: SwedishDefence:MessageWrapper:CombineOwlClasses)
Private Reference Property:classMessage [1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Reference Property:classDEXversion [1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)

There are no instances that have been instantiated in this template.

There are no constraint blocks defined in this template.

No example data sets have been provided for this Template.

Issue reporting