Template: PartDefinition

This section specifies the template PartDefinition.

The specification comprises a SysML Block that represents the template and an associated Parametric Diagram that defines the templates and PLCS PSMTemplate objects instantiated by the PartDefinition template.

The specification comprises the following sections:

Section Description provides a description of the template;
Section Template Block specifies the SysML Block that represents the template;
Section Template Properties specifies the properties, i.e. the SysML Part, Reference and Value properties of the templates SysML Block;
Section Template Output Ports specifies the SysML Output Ports of the templates SysML Block. These bind to the templates and PLCS PSM objects instantiated by the PartDefinition template as described in section Template Parametric Diagram;
Section Template Constraints specifies the constraints on PLCS PSMTemplate objects instantiated by the PartDefinition template;
Section Template Parametric Diagram specifies the templates and PLCS PSMTemplate objects instantiated by the PartDefinition template;
Section Instantiated blocks specifies the templates and PLCS PSMTemplate objects instantiated by the PartDefinition template and bound to private parts of the template;
Section Default instances species the instances that have been instantiated in the template. These are used to set the default value of blocks.
Section Constraint blocks identifies the constraint blocks that have been specified in this template;
Section Example data provides example XML data sets that have been instantiated in accordance with this template.

NOTE An explanation of a template and its specification is provided in the Template overview

Description

The PartDefinition template describes how to represent an item that is a part.

Related Templates

The following templates are related to the PartDefinition template:

ItemDefinition (SwedishDefence)
The ItemDefinition specifies the construction of all individuals of this item of supply.

NOTE The PartDefinition template may make reference to other templates as part of the Parametric Diagram. These are not listed here.

Template Block

Figure 1 shows the SysML Block that represents the template. The Block is an abstraction representing a pattern of templates and PLCS PSMTemplate objects.

The properties, i.e. the SysML Block Part, Reference and Value properties, of the template's SysML Block are described in the Template Properties section.

The output ports shown on the template's SysML Block are described in the template output ports section.

The SysML Parametric diagrams for the template Block are shown in template parametric diagram section.

Figure 1 - Template block definition diagram for PartDefinition

Template Properties

The following SysML Part, Reference, and Value properties are defined for this template:

References:

suppliedBy [1] (Template: SwedishDefence:ExternalActor)

Relationship to the external actor that is the supplier or manufacturer of the part.

document [0..*] (Template: SwedishDefence:Document)

Relationship to documents that are related to the part definition.

Parts:

suppliersPartName [1] (Template: OASIS:Descriptor)

The part name used by the supplier or manufacturer. Term 339.

The reference data used in Template: OASIS:Descriptor is restricted as follows:

RDL constraint 1:

suppliersPartName constraint

The reference data for:

OASIS:Descriptor.classifiedAs -> ExternalOwlClass.class

is restricted to the following class or a subclass:

http://plcs.fmv.se/rd/SwedishDefence-rdl-en#suppliersPartName

referenceDesignatorCode [0..1] (ValueType: ExternalOwlClass)

A code that distinguishes different types of reference designations (part definitions), according to FMV Term Catalogue HDB11, term 119.

The reference data used is restricted to the following set:

alternative = http://plcs.fmv.se/rd/SwedishDefence-rdl-en#referenceDesignatorCode_alternative

original = http://plcs.fmv.se/rd/SwedishDefence-rdl-en#referenceDesignatorCode_original

expired = http://plcs.fmv.se/rd/SwedishDefence-rdl-en#referenceDesignatorCode_expired

hasProductConfiguration [0..1] (Template: OASIS:Classifier)

Indicates that an individual item of supply below this position may have variant product configurations.

The reference data used in Template: OASIS:Classifier is restricted as follows:

RDL constraint 1:

The reference data for:

ExternalOwlClass.class

is restricted to the following class or a subclass:

http://plcs.fmv.se/rd/SwedishDefence-rdl-en#partDefinitionWithConfiguration

interfaceConnector [0..*] (Template: SwedishDefence:InterfaceConnector)

Relationship to interface connectors that a part definition consists of.

supplierPartVersionId [1] (Template: OASIS:Identification)

The supplier's or manufacturer's identifier for the part version.

Values:

suppliersPartId [1] (Block: Ap239Ap233Psm:IdentifierString)

The supplier's or manufacturer's identifier for the part.

Template Output Ports

There are no output ports are defined for this template.

Template constraints

There are no constraints defined for this template.

Template Parametric diagram

This section describes the template's Parametric Diagram. The diagram details the pattern of templates and PLCS PSMTemplate objects that are required to represent the template PartDefinition.

The public properties, i.e. those visible in the template's SysML block (See Figure 1) are shown on the left of a Parametric Diagram.

NOTE Restrictions on the reference data to be set on the public properties is defined in the Template Properties section.

The output ports are shown on the right of a Parametric Diagram.

PLCS PSM objects are shaded khaki and Templates are shaded light green in a Parametric Diagram.

Figure 2 - PartDefinition

Instantiated Blocks

The following blocks are instantiated by this template and bound to private parts of the template as shown in the Parametric Diagram section:

Private Part Property:partDefinitionClass [1] (Template: OASIS:Classifier)

Private Reference Property:classPartDefinition [1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1

Constraint: ur1

Specification: (OCL2.0)

ExternalOwlClass::allInstances()->isUnique(class)

Private Part Property:partDefinition [1] (Template: OASIS:Part)

Private Reference Property:partDefVdc [1] (Template: OASIS:ViewDefinitionContext)

Private Part Property:suppliersPartIdentification [1] (Template: OASIS:Identification)

Private Reference Property:classSuppliersPartIdentification [1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1

Constraint: ur1

Specification: (OCL2.0)

ExternalOwlClass::allInstances()->isUnique(class)

Private Part Property:referenceDesignatorCodeClassAsg [0..1] (Template: OASIS:Classifier)

Private Part Property:combineClassifiers [1] (Constraint Block: OASIS:Classifier:CombineClassifiers)

Private Part Property:docAsg [0..*] (Block: Ap239Ap233Psm:DocumentAssignment)

Private Part Property:interfaceConnectorAsg [0..*] (Block: Ap239Ap233Psm:NextAssemblyViewUsage)

Private Part Property:longevityPva [0..1] (Block: Ap239Ap233Psm:PropertyValueAssignment)

Private Part Property:meanTimeBetweenFailurePva [0..1] (Block: Ap239Ap233Psm:PropertyValueAssignment)

Default instances

There are no instances that have been instantiated in this template.

Constraint Blocks

There are no constraint blocks defined in this template.

Example data

No example data sets have been provided for this Template.