Template: SwedishDefence:Competence

This section specifies the template Competence.

The specification comprises a SysML Block that represents the template and an associated Parametric Diagram that defines the templates and PLCS PSMTemplate objects instantiated by the Competence template.

The specification comprises the following sections:

NOTE    An explanation of a template and its specification is provided in the Template overview
The Competence template describes how to represent a personell competence that is authorized by the armed forces, e.g. electrician, tank mechanics, etc.

No templates have been explicitly defined as being related to the Competence template.

NOTE    The Competence template may make reference to other templates as part of the Parametric Diagram. These are not listed here.

Figure 1 shows the SysML Block that represents the template. The Block is an abstraction representing a pattern of templates and PLCS PSMTemplate objects.

The properties, i.e. the SysML Block Part, Reference and Value properties, of the template's SysML Block are described in the Template Properties section.

The output ports shown on the template's SysML Block are described in the template output ports section.

The SysML Parametric diagrams for the template Block are shown in template parametric diagram section.

Figure 1 -  Template block definition diagram for Competence

The following SysML Part, Reference, and Value properties are defined for this template:

Parts:
competenceDescription [0..1] (Template: OASIS:Descriptor)
Description of specific competence.
The reference data used in Template: OASIS:Descriptor is restricted as follows:
RDL constraint 1:
competenceDescription constraint
The reference data for:
OASIS:Descriptor.classifiedAs -> ExternalOwlClass.class
is restricted to the following class or a subclass:
competenceId [1] (Template: OASIS:Identification)
Identification of specific competence.
The reference data used in Template: OASIS:Identification is restricted as follows:
RDL constraint 1:
competenceId constraint
The reference data for:
OASIS:Identification.role -> ExternalOwlClass.class
is restricted to the following class or a subclass:
competenceName [0..1] (Template: OASIS:Descriptor)
Name of competence, e.g. mechanics armored vehicles, mechanics personal cars.
The reference data used in Template: OASIS:Descriptor is restricted as follows:
RDL constraint 1:
competenceName constraint
The reference data for:
OASIS:Descriptor.classifiedAs -> ExternalOwlClass.class
is restricted to the following class or a subclass:

The following output ports are defined for this template:

PSMStypeOfPerson (Block: Ap239Ap233Psm:TypeOfPerson)
Enables the Block: Ap239Ap233Psm:TypeOfPerson instantiated by this template to be referenced when the template is used.

There are no constraints defined for this template.

This section describes the template's Parametric Diagram. The diagram details the pattern of templates and PLCS PSMTemplate objects that are required to represent the template Competence.

The public properties, i.e. those visible in the template's SysML block (See Figure 1) are shown on the left of a Parametric Diagram.

NOTE    Restrictions on the reference data to be set on the public properties is defined in the Template Properties section.

The output ports are shown on the right of a Parametric Diagram.

PLCS PSM objects are shaded khaki and Templates are shaded light green in a Parametric Diagram.

Figure 2 -  Competence

The following blocks are instantiated by this template and bound to private parts of the template as shown in the Parametric Diagram section:

Private Part Property:competence [1] (Block: Ap239Ap233Psm:TypeOfPerson)
Private Part Property:combineDescriptors [1] (Constraint Block: OASIS:Descriptor:CombineDescriptions)

There are no instances that have been instantiated in this template.

There are no constraint blocks defined in this template.

No example data sets have been provided for this Template.

Issue reporting