This section specifies the template IdentifyingInformation.
The specification comprises a SysML Block that represents the template and an
associated Parametric Diagram that defines the templates and
PLCS PSMTemplate objects
instantiated by the IdentifyingInformation template.
The specification comprises the following sections:
- Section Description provides a
description of the template;
- Section Template Block specifies the SysML
Block that represents the template;
- Section Template Properties specifies
the properties, i.e. the SysML Part, Reference and Value properties of the
templates SysML Block;
- Section Template Output Ports
specifies the SysML Output Ports of the templates SysML Block. These bind to the
templates and PLCS PSM objects
instantiated by the IdentifyingInformation template as
described in section Template
Parametric Diagram;
- Section Template Constraints specifies
the constraints on PLCS PSMTemplate objects instantiated by the
IdentifyingInformation template;
- Section Template Parametric
Diagram specifies the templates and PLCS PSMTemplate objects instantiated by the
IdentifyingInformation template;
- Section Instantiated blocks specifies
the templates and PLCS PSMTemplate objects instantiated by the
IdentifyingInformation template and bound to private
parts of the template;
- Section Default instances species the
instances that have been instantiated in the template. These are used to set
the default value of blocks.
- Section Constraint blocks identifies the
constraint blocks that have been specified in this template;
- Section Example data
provides example XML data sets that have been instantiated in accordance
with this template.
NOTE
An explanation of a template and its specification is provided in
the
Template
overview
The template describes how to represent identifying information related to an ItemOfSupplyDefinition.
No templates have been explicitly defined as being related to the IdentifyingInformation template.
NOTE
The IdentifyingInformation template may make reference
to other templates as part of the Parametric Diagram. These are not listed
here.
Figure 1 shows the SysML Block that represents the template. The Block is an abstraction
representing a pattern of templates and PLCS PSMTemplate objects.
The properties, i.e. the SysML Block Part, Reference and Value properties, of the
template's SysML Block are described in the Template
Properties section.
The output ports shown on the template's SysML Block are described in the template output ports section.
The SysML Parametric diagrams for the template Block are shown in template parametric diagram section.
Figure 1 - Template block definition diagram for IdentifyingInformation
The following SysML Part, Reference, and Value properties are defined for this template:
References:
Parts:
IdentifierandeUppgifter [0..1] (Template: OASIS:
Descriptor)
Information av artskiljande karaktär (i allt vesäntligt tekniska data) som bedöms
vara av väsentlig betydelse för förnödenhets försörjning och teknisk tjänst, samt
vilken information inte meddelats av förrådsbenämningen.
The reference data used in Template: OASIS:
Descriptor is restricted as follows:
RDL constraint 1:Identifierande uppgifter constraint
The reference data for:
OASIS:Descriptor.classifiedAs -> ExternalOwlClass.class
is restricted to the following class or a subclass:
KompletterandeUppgifter [0..1] (Template: OASIS:
Descriptor)
Information av teknisk karaktär som erfordras för identifiering, anskaffning och kontroll.
Dock inte sådan information som framgår av förrådsbenämningen och/eller i term identifierande
uppgifter och referensbeteckningen.
The reference data used in Template: OASIS:
Descriptor is restricted as follows:
RDL constraint 1:Kompletterande uppgifter constraint
The reference data for:
OASIS:Descriptor.classifiedAs -> ExternalOwlClass.class
is restricted to the following class or a subclass:
OförkortadFörrådsbenämning [0..1] (Template: OASIS:
Descriptor)
Oförkortad förrådsbenämning anges i de fall FBEN, term 102 med eventuellt preciserade
tillägg av utrymmesskäl (19 positioner) måste förkortas så att tydligheten inte försämras.
Ordföljden måste följa FBEN. Oförkortad förrådsbenämning anges inte för taktisk förrådsbenämning
inte heller för /T, /S eller /K (med tillbehör, komplett resp sats).
The reference data used in Template: OASIS:
Descriptor is restricted as follows:
RDL constraint 1:Oförkortad förrådsbenämning constraint
The reference data for:
OASIS:Descriptor.classifiedAs -> ExternalOwlClass.class
is restricted to the following class or a subclass:
UtländskBenämning [0..1] (Template: OASIS:
Descriptor)
Utländsk benämning kan anges på engelska, tyska och franska. Då utländsk benämning
i första hand är till för tulldeklaration bör den vara så tydlig som möjligt och helst
på engelska. Utländsk benämning bör följa tillverkarens benämningsförslag, men om
denna är för otydlig skall den anges så tydligt som möjligt. Benämningen bör vara
en artbenämning och om det finns en NATO-benämning på engelska bör denna användas.
The reference data used in Template: OASIS:
Descriptor is restricted as follows:
RDL constraint 1:Utländsk benämning constraint
The reference data for:
OASIS:Descriptor.classifiedAs -> ExternalOwlClass.class
is restricted to the following class or a subclass:
NATOKlassificeringskod [0..1] (Template: OASIS:
Descriptor)
Kod som anger, vilket land (eg. vilken nationell "registreringsenhet") som ansvarar
för kodifieringen av aktuellt NATO-nummer.
The reference data used in Template: OASIS:
Descriptor is restricted as follows:
RDL constraint 1:NATO Klassificeringskod constraint
The reference data for:
OASIS:Descriptor.classifiedAs -> ExternalOwlClass.class
is restricted to the following class or a subclass:
NATOLandkod [0..1] (Template: OASIS:
Descriptor)
Kod som anger, vilket land (eg. vilken nationell "registreringsenhet") som ansvarar
för kodifieringen av aktuellt NATO-nummer.
The reference data used in Template: OASIS:
Descriptor is restricted as follows:
RDL constraint 1:Utländsk benämning constraint
The reference data for:
OASIS:Descriptor.classifiedAs -> ExternalOwlClass.class
is restricted to the following class or a subclass:
NATOArtikellöpnummer [0..1] (Template: OASIS:
Descriptor)
Löpande nummer för artikel vilket unikt identifierar artikeln inom aktuell landskod.
The reference data used in Template: OASIS:
Descriptor is restricted as follows:
RDL constraint 1:Utländsk benämning constraint
The reference data for:
OASIS:Descriptor.classifiedAs -> ExternalOwlClass.class
is restricted to the following class or a subclass:
NATOArtikelbeteckning [0..1] (Template: OASIS:
Identification)
NATO:s total artikelbeteckning (-identitet). Är uppbyggt enligt modellen: Term 266
(NATO:s Klassificeringskod, NSC) + Term 267 (NATO:s landsnummer, NCB) + term 268 (NATO:s
artikellöpnummer, IIN). Redigering: ggkk-ll-nnn-nnnn Ex. 1007- 06-123-4567 Oredigerat:ggkkllnnnnnnn
Ex: 1007061234567
The reference data used in Template: OASIS:
Identification is restricted as follows:
RDL constraint 1:NATO Benämning constraint
The reference data for:
OASIS:Identification.classifiedAs -> ExternalOwlClass.class
is restricted to the following class or a subclass:
NATOBenämning [0..1] (Template: OASIS:
Descriptor)
NATO:s artikelbenämning. Bygger delvis på fördefinierade namn, beskrivna i en speciell
förteckning, ACodP-3 - NATO Item Name Directory
The reference data used in Template: OASIS:
Descriptor is restricted as follows:
RDL constraint 1:NATO Benämning constraint
The reference data for:
OASIS:Descriptor.classifiedAs -> ExternalOwlClass.class
is restricted to the following class or a subclass:
The following output ports are defined for this template:
psmCollection (Block: Ap239Ap233Psm:
Collection)
Enables the
Block: Ap239Ap233Psm:
Collection instantiated by this template to be referenced
when the template is used.
There are no constraints defined for this template.
This section describes the template's Parametric Diagram. The diagram details
the pattern of templates and PLCS PSMTemplate objects that are required to
represent the template IdentifyingInformation.
The public properties, i.e. those visible in the template's SysML block (See Figure 1) are shown on the left of a
Parametric Diagram.
NOTE
Restrictions on the reference data to be set on the public properties is
defined in the
Template Properties section.
The output ports are shown on the right of a Parametric Diagram.
PLCS PSM
objects are shaded khaki and
Templates
are shaded light green in a Parametric Diagram.
Figure 2 - Parametric diagram for IdentifyingInformation
The following blocks are instantiated by this template and bound to private parts
of the
template as shown in the Parametric Diagram
section:
Private Part Property:
IdentifyingInformationCollection [1] (Template: OASIS:
Collection)
Private Part Property:
IdentifyingInformationIdentifierStockItem [1] (Template: OASIS:
StockItem)
Private Reference Property:
classIdentifyingInformationId [1] (Block: Ap239Ap233Psm:
ExternalOwlClass)
The following constraint, normally a uniqueness constraint, is
applicable when instantiating the ExternalOwlClass:
rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:
IdentifyingInformationId [1] (Template: OASIS:
Identification)
Private Part Property:
combineDescriptors1 [1] (Constraint Block: OASIS:Descriptor:
CombineDescriptors)
Private Part Property:
combineDescriptors2 [1] (Constraint Block: OASIS:Descriptor:
CombineDescriptors)
Private Part Property:
combineDescriptors3 [1] (Constraint Block: OASIS:Descriptor:
CombineDescriptors)
Figure 3 shows the instances that have been instantiated in the template. These are
used to set the default value of blocks.
Figure 3 - Model instance diagram for IdentifyingInformation
The following instances have been created:
There are no constraint blocks defined in this template.
No example data sets have been provided for this Template.