This section specifies the template PropertyValue.
The specification comprises a SysML Block that represents the template and an
associated Parametric Diagram that defines the templates and
PLCS PSMTemplate objects
instantiated by the PropertyValue template.
The specification comprises the following sections:
- Section Description provides a
description of the template;
- Section Template Block specifies the SysML
Block that represents the template;
- Section Template Properties specifies
the properties, i.e. the SysML Part, Reference and Value properties of the
templates SysML Block;
- Section Template Output Ports
specifies the SysML Output Ports of the templates SysML Block. These bind to the
templates and PLCS PSM objects
instantiated by the PropertyValue template as
described in section Template
Parametric Diagram;
- Section Template Constraints specifies
the constraints on PLCS PSMTemplate objects instantiated by the
PropertyValue template;
- Section Template Parametric
Diagram specifies the templates and PLCS PSMTemplate objects instantiated by the
PropertyValue template;
- Section Instantiated blocks specifies
the templates and PLCS PSMTemplate objects instantiated by the
PropertyValue template and bound to private
parts of the template;
- Section Default instances species the
instances that have been instantiated in the template. These are used to set
the default value of blocks.
- Section Constraint blocks identifies the
constraint blocks that have been specified in this template;
- Section Example data
provides example XML data sets that have been instantiated in accordance
with this template.
NOTE
An explanation of a template and its specification is provided in
the
Template
overviewThe PropertyValue template describes how to represent a value of an operational property
definition that is registered at a certain time for a specific item of supply individual,
or that is defined as an allowed value for the property.
No templates have been explicitly defined as being related to the PropertyValue template.
NOTE
The PropertyValue template may make reference
to other templates as part of the Parametric Diagram. These are not listed
here.
Figure 1 shows the SysML Block that represents the template. The Block is an abstraction
representing a pattern of templates and PLCS PSMTemplate objects.
The properties, i.e. the SysML Block Part, Reference and Value properties, of the
template's SysML Block are described in the Template
Properties section.
The output ports shown on the template's SysML Block are described in the template output ports section.
The constraints shown on the template's SysML Block are described in the template constraints section.
The SysML Parametric diagrams for the template Block are shown in template parametric diagram section.
Figure 1 - Template block definition diagram for PropertyValue
The following SysML Part, Reference, and Value properties are defined for this template:
References:
unit [0..1] (Block: Ap239Ap233Psm:
ExternalUnit)
An external unit (OWL individual) representing the measurement unit for the property
value.
The following constraint, normally a uniqueness constraint, is
applicable when instantiating the ExternalUnit:
rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: UR1Specification: (OCL2.0)
ExternalUnit::allInstances()->isUnique(definition)
Values:
numericalValue [0..1] (Real)
Value of the property (if numerical, use textValue othervise).
textValue [0..1] (String)
Value of the property (if text, use numericalValue othervise).
The following output ports are defined for this template:
The following constraints are defined for this template:
Constraint: textOrNumericSpecification: (OCL2.0)
textValue.oclIsUndefined () xor numericalValue.oclIsUndefined ()
Constraint: unitRequiredSpecification: (OCL2.0)
unit.oclIsUndefined () = numericalValue.oclIsUndefined ()
Constraint: validUnitSpecification: (OCL2.0)
operatalPropertyDefinition.allowedUnits->isEmpty() xor
operatingPropertyDefinition.allowedUnits->include(unit)
This section describes the template's Parametric Diagram. The diagram details
the pattern of templates and PLCS PSMTemplate objects that are required to
represent the template PropertyValue.
The public properties, i.e. those visible in the template's SysML block (See Figure 1) are shown on the left of a
Parametric Diagram.
NOTE
Restrictions on the reference data to be set on the public properties is
defined in the
Template Properties section.
The output ports are shown on the right of a Parametric Diagram.
PLCS PSM
objects are shaded khaki and
Templates
are shaded light green in a Parametric Diagram.
Figure 2 - PropertyValue
The following blocks are instantiated by this template and bound to private parts
of the
template as shown in the Parametric Diagram
section:
Private Part Property:
localizedString [0..1] (Block: Ap239Ap233Psm:
LocalizedString)
Private Part Property:
select [1] ( Constraint Block:
SwedishDefence:PropertyValue:
ChooseValue)
Protected Part Property:
pv [1] (Block: Ap239Ap233Psm:
PropertyValue)
There are no instances that have been instantiated in this template.
Figure 3 shows the constraint blocks that have been created in the template.
Constraint Blocks are typically used to combine blocks into a collection that
can then be bound to a property. For example, combining a set of identifications
that can then be bound to property of type Identification.
Figure 3 - Constraint block diagram for PropertyValue
The following constraint blocks have been created:
Constraint: ChooseValueSpecification: (OCL2.0)
selected = if val1.oclIsUndefined () then val2 else val1 endif
No example data sets have been provided for this Template.
