Template: Mounting

This section specifies the template Mounting.

The specification comprises a SysML Block that represents the template and an associated Parametric Diagram that defines the templates and PLCS PSMTemplate objects instantiated by the Mounting template.

The specification comprises the following sections:

Section Description provides a description of the template;
Section Template Block specifies the SysML Block that represents the template;
Section Template Properties specifies the properties, i.e. the SysML Part, Reference and Value properties of the templates SysML Block;
Section Template Output Ports specifies the SysML Output Ports of the templates SysML Block. These bind to the templates and PLCS PSM objects instantiated by the Mounting template as described in section Template Parametric Diagram;
Section Template Constraints specifies the constraints on PLCS PSMTemplate objects instantiated by the Mounting template;
Section Template Parametric Diagram specifies the templates and PLCS PSMTemplate objects instantiated by the Mounting template;
Section Instantiated blocks specifies the templates and PLCS PSMTemplate objects instantiated by the Mounting template and bound to private parts of the template;
Section Default instances species the instances that have been instantiated in the template. These are used to set the default value of blocks.
Section Constraint blocks identifies the constraint blocks that have been specified in this template;
Section Example data provides example XML data sets that have been instantiated in accordance with this template.

NOTE An explanation of a template and its specification is provided in the Template overview

Description

The Mounting template describes how to represent the installation or mounting of an ItemDefinition in an ItemOfSupplyIndividual. Note that the mounted ItemDefinition may be an individual or a type.

Related Templates

No templates have been explicitly defined as being related to the Mounting template.

NOTE The Mounting template may make reference to other templates as part of the Parametric Diagram. These are not listed here.

Template Block

Figure 1 shows the SysML Block that represents the template. The Block is an abstraction representing a pattern of templates and PLCS PSMTemplate objects.

The properties, i.e. the SysML Block Part, Reference and Value properties, of the template's SysML Block are described in the Template Properties section.

The output ports shown on the template's SysML Block are described in the template output ports section.

The constraints shown on the template's SysML Block are described in the template constraints section.

The SysML Parametric diagrams for the template Block are shown in template parametric diagram section.

Figure 1 - Template block definition diagram for Mounting

Template Properties

The following SysML Part, Reference, and Value properties are defined for this template:

References:

superiorIndividual [1] (Template: SwedishDefence:ItemIndividual)

Relationship to the item of supply individual in which the item of supply individual or item definition has been mounted

inferiorIndividual [0..1] (Template: SwedishDefence:ItemIndividual)

Relationship to the item of supply individual that is being mounted.

inferiorItem [0..1] (Template: SwedishDefence:ItemDefinition)

Relationship to the item definition that is being mounted.

mountedAs [0..1] (Template: SwedishDefence:PhysicalElement)

Relationship to the physical structure element that represents the inferior individual or inferior item

Values:

mountingDate [0..1] (Block: Ap239Ap233Psm:DateTimeString)

Date of mounting

The following constraint, normally a uniqueness constraint, is applicable when instantiating the DateTimeString:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1

Constraint: XSDDATETIME

Specification: (OCL2.0)

self.matches('[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}Z')

dismountingDate [0..1] (Block: Ap239Ap233Psm:DateTimeString)

Date of dismounting

The following constraint, normally a uniqueness constraint, is applicable when instantiating the DateTimeString:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1

Constraint: XSDDATETIME

Specification: (OCL2.0)

self.matches('[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}Z')

Template Output Ports

There are no output ports are defined for this template.

Template constraints

The following constraints are defined for this template:

Constraint: inferiorObjectRequired

Specification: (OCL2.0)

inferiorItem.oclIsUndefined () xor inferiorIndividual.oclUndefined ()

Either an inferiorItem or an inferiorIndividual must be instantiated

Template Parametric diagram

This section describes the template's Parametric Diagram. The diagram details the pattern of templates and PLCS PSMTemplate objects that are required to represent the template Mounting.

The public properties, i.e. those visible in the template's SysML block (See Figure 1) are shown on the left of a Parametric Diagram.

NOTE Restrictions on the reference data to be set on the public properties is defined in the Template Properties section.

The output ports are shown on the right of a Parametric Diagram.

PLCS PSM objects are shaded khaki and Templates are shaded light green in a Parametric Diagram.

Figure 2 - Mounting

Instantiated Blocks

The following blocks are instantiated by this template and bound to private parts of the template as shown in the Parametric Diagram section:

Private Part Property:assembly [1] (Template: OASIS:RealizedPartAssembly)

Private Part Property:rel [0..1] (Block: Ap239Ap233Psm:ProductDefinitionElementRelationship)

Private Part Property:effectivityRoleClass [1] (Template: OASIS:Classifier)

Private Reference Property:classMounting [1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1

Constraint: ur1

Specification: (OCL2.0)

ExternalOwlClass::allInstances()->isUnique(class)

Private Part Property:relClass [1] (Block: Ap239Ap233Psm:Classification)

Private Reference Property:classMountedAs [1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1

Constraint: ur1

Specification: (OCL2.0)

ExternalOwlClass::allInstances()->isUnique(class)

Private Part Property:partViewDefOrPAIview [1] ( Constraint Block: SwedishDefence:Mounting:PartViewDefinitionOrProductAsIndividuaViewSelector)

Default instances

There are no instances that have been instantiated in this template.

Constraint Blocks

Figure 3 shows the constraint blocks that have been created in the template.

Constraint Blocks are typically used to combine blocks into a collection that can then be bound to a property. For example, combining a set of identifications that can then be bound to property of type Identification.

Figure 3 - Constraint block diagram for Mounting

The following constraint blocks have been created:

Constraint: PartViewDefinitionOrProductAsIndividuaViewSelector

Specification: (OCL2.0)

assigned = if not partViewDefinition.oclIsUndefined() then partViewDefinition else productAsIndividualView endif

If an inferiorIndividual is instantiated it must be assigned to child:ProductViewDefinition, otherwise inferiorItem must be assigned to child:ProductViewDefinition

Example data

No example data sets have been provided for this Template.